![]() |
Stripping lower oil cooler threads
Years ago the bottom oil cooler hose I removed stripped the threads on the cooler, ended up buying a used replacement cooler. Again on another car ("84 300D) I need to remove the bottom oil cooler hose. The top hose did break loose but the bottom will not. I thought maybe I would heat the connection to break it loose before stripping the threads on the cooler. Any Ideas?
|
|
Found no information to keep the threads from stripping on the oil cooler when removing the bottom line.
|
oh well..
perhaps your search will be more successful... |
I just did this on my SDL. The oil cooler is aluminum and the fittings are steel, not a good combo. But at least the new Mercedes fittings are aluminum. I tried heating mine witha tourch until it was red, it didn't work.
|
All times are GMT -4. The time now is 06:49 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website