PeachParts Mercedes-Benz Forum - torque setting: 190E 2.3---water pump

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)

- Tech Help (http://www.peachparts.com/shopforum/tech-help/)

- - torque setting: 190E 2.3---water pump (http://www.peachparts.com/shopforum/tech-help/98500-torque-setting-190e-2-3-water-pump.html)

guseka01

07-06-2004 04:22 PM

torque setting: 190E 2.3---water pump

What TORQUE SETTING should be used in tightening the 7-8 bolts that attach the water pump of a 190E 2.3, model year 1991? The bolts are approx. 4mm dia. & threaded near the bottoms.

Thank You.

Krolroger

07-06-2004 08:12 PM

Assuming this is the M102 4 cylinder gasoline engine, the value given in the Haynes workshop manual is 10Nm, or 8 lbf ft. That's firmish hand tight.

All times are GMT -4. The time now is 11:10 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website