|
|
|
#1
|
|||
|
|||
I have a 1986 300sdl [174000]that shimmies in the front when I hit a large wave or bump in the road sometimes so severe I have to break to stop the front end from shaking. I just had alignment, wheels balanced, and idler arm replaced. What is next to remedy my problem?
|
#2
|
|||
|
|||
Check the steering damper.
------------------ Jeff Lawrence 1989 300e 2000 Dodge Grand Caravan SE |
#3
|
||||
|
||||
Struts?
------------------ J.H. '86 300E |
#4
|
|||
|
|||
There is a large bushing at the end of the BRAKE strut rod on each lower control arm, when they wear out this type of shimmy can happen. Also as posted the steering shock should be checked & replaced.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Running list of failures during 3 years of ownership | Q | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 33 | 01-22-2006 08:13 AM |
240D intermittant starting problem | pj67coll | Diesel Discussion | 12 | 12-13-2003 07:16 AM |
Electrical Problem? | 87300SDLTurbo | Tech Help | 0 | 10-23-2002 02:29 AM |
Igniton switch or Relay Problem | cmusante | Tech Help | 1 | 10-07-2002 06:00 PM |
Paying Labor Cost to look for problem!!!! | Aija | Tech Help | 4 | 07-20-2002 09:13 AM |