|
|
|
|
|
#2
10-07-2021, 06:11 AM
|
||||
|
||||
|
What is it for? Engine or vehicle?
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!!  1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! 
|
|
#3
10-07-2021, 07:35 AM
|
|||
|
|||
|
I'm assuming it works for all of the om-60x motors. In the event of a leak, it cuts a fresh sealing surface in the head for the affected pre-chamber. The ones I have seen were $500+ before being discontinued, but the concept is simple. If I can find an 1-1/8" flat reamer bit I'll adapt it.
https://www.tetools.com/injector-cleaner-reamer-19-x-19mm
|
|
#4
01-12-2022, 11:19 AM
|
||||
|
||||
|
Did you ever come up with a tool to do this job?
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
