|
|
|
#1
|
||||
|
||||
VIDEO LINK: Seperating ball joint from the steering knuckle
|
#2
|
||||
|
||||
Quick comment
That was excellent...thanks for posting the vid clip. I've read numerous times about this method, but seeing it on a vid clip proved to be very encouraging that the job can be extremely easy, while keeping the integrity of the other parts.
I have a 95 E300D that I need to change the ball joints and bushings, so this is the method I'll use. Thanks again! Andy |
#3
|
||||
|
||||
Recycled
for a local friend.
.
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|