Ignition Coil Type????Blue, red, etc
Hello all,
Well, I ebayed the 220SEb to support the 6.3! I am now trying to get the car running after many years of being dormant. The car currently has a Crane Cams XR-700 optical ignition conversion, it is running an unresisted Bosch Red coil. I'm thinking this setup is wrong. The spark is there but is not the bright hot spark that I need. Should this setup have a bosch blue coil to run unresisted? Would adding series resistors help the red coil produce a better spark? If so, what values of resistors should be used? Thanks for any advice you have. Happy Motoring, K. |
Masure the coil resistance across pos/neg terminals and post the finding..
|
See http://www.mbzponton.org/valueadded/maintenance/ignition/coil.htm
It's a few years old, but may still apply. The spark on my ignition system is not the bright hot spark I expect, but that may be what it was 40 years ago. Len '59 220S Cabriolet |
All times are GMT -4. The time now is 02:45 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website