|
|
|
#1
|
|||
|
|||
W108 inner fender skirt R&R
I cleaned the collection of pine needles (an acidic mixture) and road sand & grit.
I was suprised to see a drain hose exit into the space between the inner and outer fender (on the driver's side). So, on re-assembly, I drilled a hole in the skirt, and extended the drain hose so it drains outside of this hidden space. I used a ~6" piece of 1/2" galvanized pipe, with a hose clamp. Seems like a design error.
__________________
1970 280S M130 engine- good runner 1971 250 M130 engine- #2 rod bearing, gone 1971 280SE (blown engine,parts car) 1977 German 280S W116-only 33 years old |
Bookmarks |
|
|