Gasket/Crush washers - Tranny questions -722.004
Seems so simple, but I cannot for the life of me find a crush washer that will work on the torque converter plug/bolt. It is a 5 MM bolt but all the washers I have found are too thick and I do not think they are soft enough.
Also the tranny line bolt that is also the drain --- one washer on top between pan and line and one below (on top of drain plug) or just one on top of drain plug. Mine had two but the shop manual only mentions one. Any help as to where I might find these, or what else I might use:o |
the tranny line bolt....
has 2 aluminum washers.
J.C. Whitney: http://www.jcwhitney.com/webapp/wcs/stores/servlet/Product?storeId=10101&Pr=p_Product.CATENTRY_ID%3A2008042&TID=8014524F&productId=2008042&catalogId=10 101 McMaster-Carr has this selection: M3 3.2 mm 7 mm .45 mm 98044A212 6.17 per Pack of 25 M4 4.3 mm 9 mm .7 mm 98044A216 6.24 per Pack of 25 M5 5.3 mm 10 mm .9 mm 98044A220 6.67 per Pack of 25 M6 6.4 mm 12 mm 1.4 mm 98044A224 10.41 per Pack of 25 M8 8.4 mm 16 mm 1.4 mm 98044A228 7.29 per Pack of 10 M10 10.5 mm 20 mm 1.8 mm 98044A232 6.82 per Pack of 5 M12 13 mm 24 mm 2.3 mm 98044A235 9.37 per Pack of 5 M14 15 mm 28 mm 2.3 mm 98044A238 2.89 per Pack of 1 M16 17 mm 30 mm 2.7 mm 98044A241 2.92 |
thanks
|
All times are GMT -4. The time now is 12:04 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website