|
|
|
|
|
#1
04-16-2008, 11:35 AM
|
|||
|
|||
|
Climate servo "upgrade" on ebay - seems good enough
Here is a link to a climate servo bypass system all set and ready to go!
|
|
#2
04-16-2008, 06:47 PM
|
||||
|
||||
|
im already running a brass valve on my ACCII heater. . .all you need is a brass valve, as depitced, and a male to male connection to connect two hoses. . .dead simple. . .
its kinda funny someone is selling this device as a fix. . I should have thought of that. . .
__________________
". . .back before accountants designed cars"  -Current Stable- '78 MB 450SL-C 107.024.12.020783 #3840 <Kayleen> '85 FORD F250 6.9L Diesel <Allison> '98 Lexus ES300 <Rachel> Long Gone... '74 Chevy G10...........................'99 GMC Yukon 4X4 '83 Chevy Suburban 6.2 diesel .....'99 SAAB 9-5 '90 Mitsubishi Eclipse GS............. '01 Chevy Tahoe '98 Nissan Altima .......................'02 MB ML320 '88 Chevy Suburban V2500 4X4 6.2 diesel
|
|
#3
04-17-2008, 10:52 AM
|
||||
|
||||
|
My heater was too cold with a working ACCII, so I did this same bypass with the same looking ball valve as shown above I bought for $8. at Lowes.
Flames now shoot out of those vents!  
__________________
 "Our Lady of Blessed Acceleration... don't Fail Us Now"
|
|
#4
04-17-2008, 12:29 PM
|
||||
|
||||
|
I would opt for an upgrade on the clamps. Some stainless crimp clamps would be better, in my opinion.
|
 |
| Bookmarks |
|
|
Linear Mode
