|
|
|
#1
|
||||
|
||||
Stupid Sunroof Question
Concerning the adjustment of the front height of manual or electric sunroofs on 114/115 & 123 cars: After the adjustment, we tighten the sheet metal screws that hold down the top rail and then the front machine screw. Should this screw be tightened as far down as possible or just to contacting the rail? It seems that tightening it all the way down will bend the rail.
__________________
Don't Chrome them; polish them |
#2
|
||||
|
||||
If I remember correctly, you just play around with those until you have the height where you want it. Then you tighten down the other screws to hold it there. The back adjustment seemed to be the hardest one to get right for me.
__________________
" We have nothing to fear but the main stream media itself . . . ."- Adapted from Franklin D Roosevelt for the 21st century OBK #55 1998 Lincoln Continental - Sold Max 1984 300TD 285,000 miles - Sold The Dee8gonator 1987 560SEC 196,000 miles - Sold Orgasmatron - 2006 CLS500 90,000 miles 2002 C320 Wagon 122,000 miles 2016 AMG GTS 12,000 miles |
Bookmarks |
|
|