Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Vintage Mercedes Forum

LinkBack Thread Tools Display Modes
Old 10-26-2008, 10:54 PM
Registered User
Join Date: Jul 2008
Posts: 158
Ignition Timing 71 280se-M130

I have a 6cyl 280se with AC. I have installed an xr700 ignition upgrade.
Part of the procedure calls for checking the timing prior to the phase check. The degree designations are on the front and rear of the balancer. The info I have says to use the rear numbers ( based on the fact that there is an angular indicator) which is what I used to set-up the Crane system. Initially, the engine fired right up but with slight rough running. I want to make sure that I get the timing right before I adjust the phase. I sure would appreciate a step-by-step regarding the timing from here.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 04:10 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page