|
|
|
#1
|
|||
|
|||
More 250s project questions
Tomorrow, I will be taking out the main peice of the wood on the dash. How does the headlight switch and the emergency switch come out? I know the emergency switch unscrews but do I just yank the headlight switch off? Both have pyramid shaped metal rings on the attached, do those just screw off?
Any ideas how the back seat comes off? I see two bolts behind the backseat in the trunk. |
#2
|
||||
|
||||
#3
|
|||
|
|||
Figured it out. The main dash piece was very tricky but loosened the instrument cluster and wiggled it out. The backseats just pull right out. Start with the seat cushion, pull up and out. Then the seatback, unscrew the 2 nuts in the trunk behind the seat and pull it forward.
|
#4
|
|||
|
|||
So on the driver side door panel, there is a whole. Inside there is an electrical wire plug. I'm thinking this is for the door switch which triggers the dome light, same as the passenger side. Can anyone confirm?
Also, trunk light doesn't come on, checked the bulb to be fine. Is there a relay somewhere that needs to be changes? Replaced all the fuses already. |
Bookmarks |
|
|