|
|
|
#1
|
|||
|
|||
560 SL left exhaust manifold without an EGR valve?
Hi all,
I will be using r107 560 SL exhaust pipes manifolds for a project I have to fit a euro 5.0 in my W111 Coupe. The left 560 SL one has a hole for the EGR valve which I don't need. Would anybody know if some 560 SLs came without that EGR valve and with that part of the manifold without a hole? Or would there be any MB model from which I could get that elbow without and EGR valve? I could compare with a 380 SL one, but internal diametre and centering on the head port are not the same, so I believe it has to come from a 5.0 or 5.6 engine. Thanks |
#2
|
||||
|
||||
Why not just cap it?
Jonathan
__________________
Blue Ridge Mercedes Jonathan Hodgman http://www.blueridgemb.com/ Enthusiast Service, Restoration & Tuning. Follow Us on Facebook! Located in the Atlanta area Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines. Mercedes Repair Atlanta |
#3
|
|||
|
|||
Sure I could cap it, but it won’t be very aesthetic, especially on that manifold where contrarily to some others it’s not a simple threaded hole but there is a whole thing coming front and sideways…
|
#4
|
||||
|
||||
yes, I know it's a bit on the ugle side as far as aesthetics...I just can't think of any late SL manifolds be they euro or otherwise that I didn't see w/ an EGR port. Even on the 126's the ECE equipped/300HP manifolds had EGR..
Jonathan
__________________
Blue Ridge Mercedes Jonathan Hodgman http://www.blueridgemb.com/ Enthusiast Service, Restoration & Tuning. Follow Us on Facebook! Located in the Atlanta area Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines. Mercedes Repair Atlanta |
Bookmarks |
|
|