head bolt torque

[Necrosavant]

can anyone pull up the cylinder head bolt torque specs for a 68 280s?
thanks

[230/8]

81.4 foot pounds (110 Nm). Book says recheck to this torque on a hot engine. The smaller bolts at the front of the head are 19 foot pounds (25Nm).

[twinockchef]

Are you just checking the torque settings or are pulling the head off and starting with a new gasket. If your doing the latter, there is a specific sequence in tighting the bolts. It is not only the bolt sequence but also a gradual increase in torque settings in reaching the final torque.
When I rebuild the head on my engine last year I ran into a lot of problems when I did not follow the procedure exactly.
If you need list of the procedure let me know.
Good luck