Question about Door Pocket

[hippie_elmo]

Hello-

I would like to know how the door pocket on my 1973 280 is held on. This because mine is falling off and I would like to fix this.

Thanks for your help ,
Shea

[gmask]

Id it's they're anything like the ones I have .. they are screwed in at the top corners through the back of the door panel. Then the bottom is held in by tabs.

Mine are both in pretty bad shape and the plastic is borken where it's supposed to be screwed in.

Depending on how badly the plastic is damaged and wether any part sof it are missing you maybeable to glue it back together and then take the door panels off and screw them back on.

[hippie_elmo]

Originally posted by gmask
Id it's they're anything like the ones I have .. they are screwed in at the top corners through the back of the door panel. Then the bottom is held in by tabs.

Mine are both in pretty bad shape and the plastic is borken where it's supposed to be screwed in.

Depending on how badly the plastic is damaged and wether any part sof it are missing you maybeable to glue it back together and then take the door panels off and screw them back on.

Mine is only broken on the drivers door. I will check and see if it is screwed in or not. I was going to try to the glue mine back together somehow.

[gmask]

What color are the pockets? I have an off white one that's brand new.

[hippie_elmo]

Originally posted by gmask
What color are the pockets? I have an off white one that's brand new.

Mine are green

I epoxied washers to the back side of the broken out screw holes.


Borken? hehe

[hippie_elmo]

Originally posted by gmask
What color are the pockets? I have an off white one that's brand new.

Gmask-

Do you have a scan from the manual on who to take off the pockets? If so, could you post it?

Thanks allot for your help