|
|
|
#1
|
||||
|
||||
1959 Mercedes 180D
Does anyone have the valve clearances for both intake and exhaust, and torque measurements for the engine of a 1959 Mercedes 180D? I have tried www.mbzponton.org but to no avail.
Thanks |
#2
|
|||
|
|||
Have you seen this?
http://www.mbzponton.org/valueadded/maintenance/valve/adjust.htm I'm going to have to put the diesel numbers in there.
__________________
Len '59 220S Cabriolet-SOLD and living happily in Malta '83 240D 351,500 miles original owner-SOLD '88 560SL 41,000 miles - totaled and parted out https://sites.google.com/site/mercedesstuff/home '99 E300 turbo 227,500 miles '03 SLK320 40,000 miles - gave to my daughter '14 Smart electric coupe 28,500 miles '14 Smart electric cabriolet 28,500 miles '15 Smart electric coupe 28,000 miles |
#3
|
||||
|
||||
I read the the article and it was good! Now back to researching the rest of the technical items, before I start on anything.
I appreciate it, Thanks. |
#4
|
|||
|
|||
180D Valve clearance
I=.20 mm
E=.15 mm Valves are to be set when cold. Or.... I=.008 in. E=.006 in. These numbers come from a 'Glenn's' Repair Manual from 1966. Torque numbers are not mentioned in this manual, but this might get you started. |
Bookmarks |
|
|