|
|
|
#1
|
|||
|
|||
Clutch release bearing/pressure plate compatibility
Hi all,
I recently purchased a V8 3.5 pressure plate on EBay. The picture advertising it was this one: I also got a release bearing from another supplier p/n 0002506815 pictured below: The pressure plate I received was not the same as the one pictured, as it has that additional contact surface with the release bearing compared with the advertised one: I believe that type of pressure plate is an earlier model and may also have to work together with an earlier type of release bearing, as the one pictured below: According to EPC, both the pressure plate (3rd picture) and release bearing (second picture) I received are correct part numbers for the 3.5, but as there are several p/n for each item, I wonder if that 'later type" release bearing would work with the "earlier type" pressure plate, or if I should ask the supplier to switch the pressure plate he sent me with the one he advertised. Thanks! Gael Last edited by GGR; 11-22-2009 at 09:31 AM. |
Bookmarks |
|
|