|
|
|
#1
|
|||
|
|||
Lock on my 75 450sl not working....
Anyone have a trick, or way to get my trunk open, the push buttom seems inoperable - no matter which way I turn the key, thanks---
|
#2
|
||||
|
||||
On a 450SEL, you turn the key fully counter clockwise, hold it there and push it in. Then with your third hand, lift the trunk lid.
Michael
__________________
Usta haves '69 250/8, '76 280C, 1971 250C 114.023, 1976 450SEL 116.033 Current have, 1983 300SD 126.120 |
#3
|
|||
|
|||
Ain't THAT the truth!
|
#4
|
||||
|
||||
What I wanna know is how come I always have a soda in my hand when I need the darn thing open?
Michael
__________________
Usta haves '69 250/8, '76 280C, 1971 250C 114.023, 1976 450SEL 116.033 Current have, 1983 300SD 126.120 |
#5
|
|||
|
|||
I don't know about 107's, but many German cars, like Mercedes 115 and 114's, of that era have an 'access plate' in the floor of the trunk that is just held in by a tar like substance. It can be pushed up into the trunk if you push hard enough and go slow while doing it.
Then you can remove a taillight and then you can reach the lock from the inside and, after unscrewing an access plate, reach the lock from the inside and remove it. You can then lift the trunk and repair the lock. This takes about an hour, so no one will be able to break into your trunk while you are parked somewhere without it being seen. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|