|
|
|
|
|
#1
07-17-2011, 08:59 AM
|
|||
|
|||
|
body panel interchange?
Will the front fenders from a 1968 280SE, bolt to a 1967 230S (W111)? They certainly look similar. From the front, they look identical to me.
Thanks for the help.
__________________
Jackson Rockford, Michigan 1985 500SE gray market 1982 Porsche 928 1985 Mercedes 300CD X 2 Last edited by jackson101; 07-17-2011 at 01:10 PM. 
|
|
#2
07-17-2011, 09:24 AM
|
||||
|
||||
|
Quote:
Depends. What are the body designations, i.e., W108, W111, W114? MB did not make a 280 in 1968, so I would need more info. The 230S designation suggests that you have a finback body (W111?). If the 68 280 is in reality, a 280S, or 280SE, then they are different shells (W108), the profile of the fender where it meets front door is different. Jim
__________________
14 E250 BlueTEC black. 45k miles 95 E320 Cabriolet Emerald green 66k miles 94 E320 Cabriolet Emerald green 152k miles 85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles
|
|
#3
07-17-2011, 12:56 PM
|
|||
|
|||
|
280SE
Jim,
It's an SE. I've not seen it "physically", to take numbers from it. I saw it on CL and thought about it becoming a donor for my sons 67 fintail.
__________________
Jackson Rockford, Michigan 1985 500SE gray market 1982 Porsche 928 1985 Mercedes 300CD X 2
|
|
#4
07-24-2011, 11:00 AM
|
|||
|
|||
|
profile
Ya, I went and looked at this unit. The fenders look exactly the same, as you pointed out, it's probably the where the doors meet the fender that are different.
Thanks Jim
__________________
Jackson Rockford, Michigan 1985 500SE gray market 1982 Porsche 928 1985 Mercedes 300CD X 2
|
 |
| Bookmarks |
|
|
Linear Mode
