Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Vintage Mercedes Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-23-2011, 01:08 AM
Registered User
 
Join Date: Dec 2010
Location: Bangkok and Baltimore, I travel a lot
Posts: 39
MP3 Player in W108 1972 280SE (pictures)

I have a W108 and wanted to listen to my own music, so being able to plug my iPhone into the existing Becker Europa radio is the way I wanted to go. I like to keep things as original as possible. I wanted to NOT see a USB port or 3.5mm audio input jack if I sat in any seat in the car. I mounted my USB and 3.5mm audio jack on the small access panel for the Air/con controls. Another good place would be to pull the wires under the carpet that covers the transmission tunnel, and put the USB and audio jack in the console between the seats.

Please see attached photos, as it explains it much better than my writing!

I read a good article by Doug Quance on how to make the necessary cable to tap into the original radio, (article located here http://web.mac.com/dakota/Projects/Becker_MP3.html) , and wanted to add to this knowledge base with my comments. The article uses a Europa II radio, where my radio is just a plain Europa; the difference is small in that I had it even easier as I had no jumpers to move (as there are none if you have a plain Europa radio). The most interesting thing about this wiring is the radio automatically switches to use your MP3 player as soon as you connect it to the 3.5mm audio input jack, with no need to hit a switch or a "source button".

I ordered 6 items to make this project work:
1. "PAC IS335 3.5 Audio Input" and is on Amazon here http://www.amazon.com/PAC-IS335-3-5-Audio-Input/dp/B003B01AHS/ref=sr_1_1?ie=UTF8&qid=1314063320&sr=8-1 . It costs $8.99
2. "HOSA MIDI CABLE, 3ft. Right Angle" and is on Amazon here http://www.amazon.com/HOSA-CABLE-Right-Angle-Black/dp/B000068NUJ . It cost $5.18
3. "6' USB Cable with Mounting Bracket" and is on Amazon here http://www.pac-audio.com/productDetails.aspx?ProductId=871&CategoryID=31 . It cost $17.94
4. "Universal Hardwire Cable with Lighter Socket and Power Switch" from Amazon and is here: http://www.amazon.com/CLA-NHWC-Universal-Hardwire-Lighter-Socket/dp/B0035G7MV6/ref=sr_1_17?s=electronics&ie=UTF8&qid=1314061896&sr=1-17 .It cost $13.45
5. "Universal Mini USB Car Charger Adapter" from Amazon: http://www.amazon.com/Universal-Mini-Charger-Adapter-Black/dp/B001HZI2ZC/ref=sr_1_20?s=electronics&ie=UTF8&qid=1314061896&sr=1-20 . It cost $2.36
6. "Solderless Wire Quick Splice Connector - 14-16 Gauge - 25 Pack" from Amazon and is here: http://www.amazon.com/Solderless-Wire-Quick-Splice-Connector/dp/B0041PDJ0S/ref=pd_cp_e_0 .It cost $2.09.

I order everything from Amazon. I would order food from Amazon if they sold it.

Here is a better product photo of the flush mounting USB cable: http://www.pac-audio.com/productDetails.aspx?ProductId=871&CategoryID=31

Here is a better picture of the flush mounting 3.5mm audio jack. http://www.ipodcarpros.com/Dash_Mount_Aux_Inputs/c11/p223/Dashmount_3.5_Aux_Input_-_IS335_PAC/product_info.html

The "HOSA MIDI CABLE, 3ft. Right Angle" is quite important. It is hard to find a right angle (90 degree) DIN5 connector cable, and this took me a lot of digging to find this one (see item 2). You will need the "right angle" type cable, as it is needed for clearance on the back of the radio. Here is what a DIN5 connector looks like, and this is what is on the back of the Becker radio: http://en.wikipedia.org/wiki/DIN_connector

Cable from Radio to 3.5mm jack: Making the cable that plugs into the radio and then ends with a 3.5mm female audio input is the only complex thing to make. It is well documented by Doug Quance in his article, so no need to re-hash the content here. My only suggestion is that when you make the cable, do NOT think the 3.5mm female audio plug will be the same plug that will protrude from your dash. Use this homemade cable as an intermediary cable that will plug into the dashboard facing 3.5mm audio cable. The reasoning here is that if you want to put a 3.5mm audio jack in your dash (or other place below the dash, like I did), you want to drill a hole as small as possible to flush mount the 3.5mm audio jack, and if you solder the DIN5 connecter on the other end of the cable, then you will need a hole in your dash as big as the DIN5 and it simply will not work as that hole will be too big to flush mount the 3.5mm audio jack. It is actually very simple, but a little hard to explain. Take a look at my pictures of the wiring, as this helps a lot.

Power to USB port: You will need power to the MP3 player. I wanted my hidden. I do not like the look of a USB adapter plugged into the cigarette lighter on my dashboard, and then have a dangling cable to look at for the rest of my life. The cigarette lighter I bought was designed to be wired into the cars wiring. It had a cigarette lighter on one end of a 2 wire cable. The 2 wires are simple: one wire is for power, and the other wire is for ground. The ground wire had a circular termination connector on it, so just find a grounded screw somewhere and screw it in. For power, I tapped into the 12V line that powers the radio. I figured it was a good supply of power, as the wire was very thick (could be 16 gauge, and perhaps 14 gauge), and this power source is switched to the ignition key so I would not drain the battery if I forgot to switch off the MP3 player (or any other USB powered device I connect to the USB port). I used a very simple "quick splice", so I did not need to cut any wires to connect the new cigarette lighter 12v line to the radio 12v power source. It is important to get the quick splice item for 14-16 gauge wire, as the next size smaller is just too small for the very thick wire that powers the radio. Item 6 (above) is the correct item.

It is a lot easier than it looks. Soldering the DIN5 and the female 3.5mm cable together is the hard part (and it is very easy), and the rest of the install is easy and almost fun.

Note: It is VERY easy to get the radio out of the dashboard. It took me less than 5 minutes. Here is what you do:
- Take off knobs (you will need a small screwdriver, as the knobs use set screws).
- Take off the flimsy plastic balance control levers, just behind the knobs. Be careful, they are flimsy.
- Take off faceplate. It literally falls off, as the knobs seem to be the only thing holding it on.
- Now, you will see two vertical pieces of aluminum with a screw in each one. Remove the 2 screws.
- Radio slides right out.

Attached Thumbnails
MP3 Player in W108 1972 280SE (pictures)-w108_overall__wiring.jpg   MP3 Player in W108 1972 280SE (pictures)-w108_faceplate_install.jpg   MP3 Player in W108 1972 280SE (pictures)-w108_finished_install.jpg  
__________________
Pat
1972 Mercedes 280 SE with 4.5 liter V8

Last edited by uprightfan; 08-23-2011 at 02:06 AM. Reason: mistake, and typo
Reply With Quote
  #2  
Old 08-25-2011, 07:08 AM
Registered User
 
Join Date: Dec 2010
Location: Bangkok and Baltimore, I travel a lot
Posts: 39
Wow, 74 people have read this post, but 0 comments? I am feeling lonely! This must be a new record on this forum.

Or, perhaps my post was so well written nobody had any questions? Yes, that must be the case.
__________________
Pat
1972 Mercedes 280 SE with 4.5 liter V8
Reply With Quote
  #3  
Old 08-25-2011, 10:43 AM
Registered User
 
Join Date: Feb 2009
Location: BALTIMORE
Posts: 166
I'll say it's - nice job
well done my friend
IF ONLY MY RADIO WORKED .....

Last edited by jgranzier; 08-25-2011 at 05:36 PM.
Reply With Quote
  #4  
Old 08-25-2011, 11:52 AM
Registered User
 
Join Date: May 2008
Location: southern CA
Posts: 416
Quote:
Originally Posted by uprightfan View Post
I order everything from Amazon. I would order food from Amazon if they sold it.
Here this will make you feel better.
__________________
1972 280SE 4.5
Reply With Quote
  #5  
Old 08-25-2011, 05:11 PM
sjefke's Avatar
Registered User
 
Join Date: May 2006
Location: Atlanta, GA
Posts: 591
Quote:
Originally Posted by uprightfan View Post
Wow, 74 people have read this post, but 0 comments? I am feeling lonely! This must be a new record on this forum.

Or, perhaps my post was so well written nobody had any questions? Yes, that must be the case.
OK, I have a question: how do you do this for Becker Mexico radios that have an external amp connected? The DIN socket is where the amp plugs in and the amp does not have a DIN out.

Bert
__________________
'70 111 280SE/c 3.5 (4 spd manual) - sold
'63 MGB
'73 MGBGT V8
Reply With Quote
  #6  
Old 08-25-2011, 07:42 PM
Registered User
 
Join Date: Dec 2010
Location: Bangkok and Baltimore, I travel a lot
Posts: 39
Becker Mexico and MP3?

I am really have no idea about the Becker Mexico and MP3 player connections. Very good question.

But, I just sent an email to the folks at http://www.beckerautosound.com/ and they should know what is needed.

I see Doug Quance is a registered forum user (dquance) so I sent him a message to see if he knows.

Forum user gurunutkins may have an idea, as he seems to know the guts of a Becker Mexico as he posted this YouTube video on the topic: http://www.youtube.com/watch?v=D0GVZbzK-bc&feature=mfu_in_order&list=UL

I sent Gurunutkins a message as well.

I hope to get you an answer soon.

Thanks - Pat

PS: Here is a photo of my son at the wheel of the day we were installing the MP3 player (and putting on a new license plate bracket)
Attached Thumbnails
MP3 Player in W108 1972 280SE (pictures)-img_1510.jpg   MP3 Player in W108 1972 280SE (pictures)-img_1544.jpg  
__________________
Pat
1972 Mercedes 280 SE with 4.5 liter V8
Reply With Quote
  #7  
Old 08-25-2011, 09:48 PM
Registered User
 
Join Date: Jun 2006
Location: NoVA
Posts: 466
I guess I hadn't commented yet because I don't know enough about car stereo building to comment...but I do know that it's a REALLY cool idea.
__________________
Nathan
'74 280C - gone to a new home for the finishing it deserves.
'64 356SC
'74 914 2.0
Reply With Quote
  #8  
Old 08-26-2011, 02:39 AM
Registered User
 
Join Date: Dec 2010
Location: Bangkok and Baltimore, I travel a lot
Posts: 39
Billhard changed my life...

Quote:
Originally Posted by billhard View Post
Here this will make you feel better.
Now that is interesting. I never need to leave the house! I guess I will put even less miles on the Merc now I know I can get all my quality food from Amazon.
__________________
Pat
1972 Mercedes 280 SE with 4.5 liter V8
Reply With Quote
  #9  
Old 08-26-2011, 02:44 AM
Registered User
 
Join Date: Aug 2004
Posts: 77
MP3 Player in W108 1972 280SE

sjefke & uprightsfan: I have no familiarity with the Becker Mexico.
I would speculate that if you can acquire the schematics for the radio it should be a simple matter to intersect the wiring from the RF section of the radio to the audio section. Presumably all the RF is in the head and audio in the amp.
In which case you simply wire in the MP3 jack the same way I have done it.
I suspect you could either make a cable extension for the din plug to the amp and wire the MP3 jack between the male and female plugs.
Alternatively you could cut into the existing cable to the amp and wire it up to the MP3 jack. I noted there seems to be a very large number of Becker Mexico models, so make sure you note your model when searching for information. :-)
I have a schematic for a Becker Europa Stereo which also has the separate audio amp box.
That might help determine where to tap in for the modification.

Pat you wrote.
Quote:
My only suggestion is that when you make the cable, do NOT think the 3.5mm female audio plug will be the same plug that will protrude from your dash. Use this homemade cable as an intermediary cable that will plug into the dashboard facing 3.5mm audio cable. The reasoning here is that if you want to put a 3.5mm audio jack in your dash (or other place below the dash, like I did), you want to drill a hole as small as possible to flush mount the 3.5mm audio jack, and if you solder the DIN5 connecter on the other end of the cable, then you will need a hole in your dash as big as the DIN5 and it simply will not work as that hole will be too big to flush mount the 3.5mm audio jack. It is actually very simple, but a little hard to explain. Take a look at my pictures of the wiring, as this helps a lot.
The 3.5 jack I used had a small round nut and threaded onto the jack to secure it to the mounting. I only had to drill a very small hole for mounting. Personnel choice; as you can see in the pictures I made a small black cover for the jack that looks like a stock item. Basically totally invisible. On my car I did not need a 90 deg DIN, there was sufficient space behind the radio for the straight plug. This saved me time, as I could not find a 90 locally. Also I can see I should redo the pictures, I have since found a very good cleaner for the console. ;-)

Nice job on your installation Pat.

Doug


Last edited by dquance; 08-26-2011 at 03:45 PM. Reason: additional information
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page