Right Rear Bearing

[zbethem]

Quick question all.. I'm in the middle of replacing my inner and outer seals on my right rear.

Is the axle bearing pressed on? I'm going to be working on it tonight, but I'm not sure if I need to find a local shop or not to have them press it on for me.

My assumption was that the axle would slide back into place.

Working blind without a manual here and want to get the old girl back on the road tonight.

Thanks a bunch!

[bwostosh]

It is a light press fit and you can drive them off and on with a cold chisel and machinist sledge hammer or get a fancy puller.
Tap only on the inner race.
The retaining nut needs a special wrench or a punch ground to fit into the notch, Undo counterclockwise.