|
|
|
#1
|
|||
|
|||
W108 speedo cable washers
Hi
I pulled the cable off my '67 250 SE sedan a day or two ago to clean it out and check for kinks etc, and did not see which way the small washer and 'c' ring that are at the Gearbox end are fitted. Does the small washer go into the cable sheath first then the 'c' shaped ring/spacer or the other way around? The 'c' ring fell out as I removed the cable from the 'box, preventing me seeing its correct fitting... Regards Simon |
#2
|
|||
|
|||
Really? No-one knows???
|
#3
|
||||
|
||||
I don't have one handy but I bet the parts diagram book shows what goes in first. The big one that came with the owner's manual, like this.
http://www.auto-parts.spb.ru/cat/cats/m.mycat?Form
__________________
Current: 2021 Charger Scat Pack Widebody "Sinabee" 2018 Durango R/T Previous: 1972 280SE 4.5 2014 Jeep Grand Cherokee Limited "Hefe", 1992 Jeep Cherokee Laredo "Jeepy", 2006 Charger R/T "Hemi" 1999 Chrysler 300M - RIP @ 221k |
#4
|
|||
|
|||
I can't follow your link.
Do you mean the parts CATALOG >>A<< ? If so, then it sadly doesn't... |
#5
|
|||
|
|||
Good thought though...
|
#6
|
|||
|
|||
I've never seen one with a c ring, all mine are crimped . The washer would go on first so the C ring doesn't rub on the cable housing and works against the washer instead.
|
#7
|
|||
|
|||
Quote:
cheers SF |
Bookmarks |
|
|