|
|
|
#1
|
|||
|
|||
plug wires to distributor
I replaced my plugs and wire cap are rotor on my 1962 mercedes 190c, kinda forgot where each wire goes on on the distributor, tried looking for it in my manual but i can't find anything.
|
#2
|
||||
|
||||
There should be a firing order cast into the head or engine somewhere. Try to put the engine at TDC and put the plug wire that the rotor is pointing to to #1 cyl. Then continue rotating the engine watching which point in the distributor the rotor goes to next. That position is where the next plug wire goes to based on the firing order information. Continue on till they are all hooked up.
__________________
Jim |
#3
|
|||
|
|||
Firing order is 1 3 4 2
Number one spark plug wire is in the 4-5 o'clock position. |
#4
|
|||
|
|||
Firing order should be on the valve cover on that motor
It'll say zundefulge (sp?) 1 3 4 2
__________________
68 280SL - 70 280SL - 70 300SEL 3.5 - 72 350SL - 72 280SEL 4.5 - 72 220 - 72 220D - 73 450SL - 84 230GE - 87 200TD - 90 190E 2.0 - 03 G500 Nissan GTR - Nissan Skyline GTS25T - Toyota GTFour - Rover Mini - Toyota Land Cruiser HJ60 - Cadillac Eldorado - BMW E30 - BMW 135i |
#5
|
|||
|
|||
If you pull off the distributor cap, you can find #1 cylinder by looking for a small notch in the top rim of the distributor body. Clockwise from there.
__________________
1981 300TD 310k miles 1970 280sel 172k miles 1966 230 Fintail 162k miles "Where are we going? And why am I in this hand basket?" |
Bookmarks |
|
|