|
|
|
#1
|
||||
|
||||
Mercedes Benz technical data passenger cars book
Anybody have this manual that includes the w116 chassis 450sel? I'm asking because I'm looking for the specs on the coil spring part #116 321 42 04 from the 450sel and the technical book should have those figures.
.
__________________
1983 123.133 California - GreaseCar Veg System |
#2
|
||||
|
||||
I thought I might be able to help as some of the W116 numbers are presented in the W123 manual - chapter 32-250 shows the load per unit deflection, unloaded length and wire diameter for many a spring but alas not the one you specify.
I've had a quick look for chapter 32-250 in the W116 FSM over on w116.org but it doesn't seem to exist on that version of the CD... ...ummmm - good luck.
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
#3
|
||||
|
||||
Thanks for sending me a PM -- I can get you data in the next few hours...
__________________
"Senior Luna, your sense of humor is still loco... but we love it, anyway." -rickymay ____ "Your sense of humor is still loco... " -MBeige ____ "Señor Luna, your sense of humor is quite järjetön" -Delibes 1982 300SD -- 211k, Texas car, tranny issues ____ 1979 240D 4-speed 234k -- turbo and tuned IP, third world taxi hot rod 2 Samuel 12:13: "David said to Nathan, “I have sinned against the Lord.” And Nathan said to David, “The Lord also has put away your sin; you shall not die." |
#4
|
||||
|
||||
i found this in chapter 32-250 on my german W116 CD (it' more detailed than the US version)
1163214204 (front spring): spring travel (compression) per 1000 Nm of load: 15.7 coil diameter : 16.6 unloaded coil length : 468 i'm assuming the values are in mm (468mm is about 18 inches)
__________________
1983 300SD (daily driver) 1991 420SEL (work in progress) 1979 300SD (future replacement for 83 SD) RIP: 1983 300SD (totalled) 1986 420SEL |
#5
|
||||
|
||||
Quote:
Can you or someone also check this part number. 116 321 32 04 .
__________________
1983 123.133 California - GreaseCar Veg System |
#6
|
||||
|
||||
For 116 321 32 04:
Spring Deflection per 1000 N Load: 17 mm Wire Gauge: 16.3 mm Unloaded Spring Length: 466.5 mm
__________________
"Senior Luna, your sense of humor is still loco... but we love it, anyway." -rickymay ____ "Your sense of humor is still loco... " -MBeige ____ "Señor Luna, your sense of humor is quite järjetön" -Delibes 1982 300SD -- 211k, Texas car, tranny issues ____ 1979 240D 4-speed 234k -- turbo and tuned IP, third world taxi hot rod 2 Samuel 12:13: "David said to Nathan, “I have sinned against the Lord.” And Nathan said to David, “The Lord also has put away your sin; you shall not die." |
#7
|
||||
|
||||
^ what he said
__________________
1983 300SD (daily driver) 1991 420SEL (work in progress) 1979 300SD (future replacement for 83 SD) RIP: 1983 300SD (totalled) 1986 420SEL |
#8
|
||||
|
||||
Thanks fellas!
More to ask if I may.... Looking for the optional part numbers and specs on the front and rear torsion bars (sway bars) on the w116 chassis, w115 chassis and r107 chassis. I hope this is not asking too much. Thanks again in advanced.
__________________
1983 123.133 California - GreaseCar Veg System |
#9
|
|||
|
|||
Re: sway bars
DV: The part nos. that I can give you:
From a 114/115 manual: Front 107 323 01 65, 25mm Rear 114 326 10 65, 16mm 107 326 23 65, 18mm 107 326 20 65, 19mm |
#10
|
||||
|
||||
Thanks Frank. Interesting, only one front bar option vs three rear bar options.
__________________
1983 123.133 California - GreaseCar Veg System |
Bookmarks |
|
|