|
|
|
#1
|
||||
|
||||
M110 280 Auto Trans Capacity??
Hey Guys,
Anyone know how many quarts of fluid a mid-70's 280C M110 4pd automatic transmission needs on a fluid/filter change? For some reason I can't find this ANYWHERE. I have 2 engine manuals & the body & chassis manual, but the service manual or trans manual. Google & search here have turned up nothing... Thanks!
__________________
Currently: 1972 350SL Euro 4spd 1973 BMW R75/5 1981 BMW R80GS 1995 FZJ80 with OM606 Conversion In Progress |
#2
|
|||
|
|||
If the vehicle is an early 1973 280 it will have a 722.2xx (K4C025) trans.
Drain trans and fluid coupling, & refill - 5.5L (5.8Q) If a late 280 the trans will be a 722.1xx (W4B025) Drain & refill trans and torque converter - 6.6L (7Q) The early trans (722.2xx) starts in 1st gear, the late (722.1xx) in 2nd. |
#3
|
||||
|
||||
Hmm. Have to try to check the data plate. I'm pretty sure it starts in 1st. And it's a short bumper car, so I would assume it falls into the 'early' category.
I'm not draining the torque converter on this change. Fluid smelled like it's been a while since the last change & I don't want to risk 'cleaning' the clutches too much in one go. So it looks like it'll be an educated guess & then adj based on dipstick reading... EDIT: It's a 1973.
__________________
Currently: 1972 350SL Euro 4spd 1973 BMW R75/5 1981 BMW R80GS 1995 FZJ80 with OM606 Conversion In Progress |
#4
|
||||
|
||||
Any ideas on the capacity of the torque converter?
__________________
Currently: 1972 350SL Euro 4spd 1973 BMW R75/5 1981 BMW R80GS 1995 FZJ80 with OM606 Conversion In Progress |
#5
|
|||
|
|||
All '73s will have short bumpers.
On the right side of the trans case casting, just above the pan gasket joint, the trans model #, part#, and serial# are stamped into the pan rail. Fluid coupling capacity - 1L Torque converter cap. - 1.3L |
Bookmarks |
|
|