|
|
|
#1
|
||||
|
||||
W116 bigger brakes?
I have a European spec W116 350SE with 16 inch 8-hole Mercedes wheels. Is there a logical bigger rotor and caliper set up anyone has installed on a W116?
__________________
Charles Cleaver 1975 350SE + 1992 300CE-24 SportLine 5-speed + 2002 SLK320 6-speed + 1974 W114 280 1986 190E 2.3-16 (Decomm rear self-leveling suspension; Euro-code headlamps) sold 2004 Audi S4 6-spd - sold 1969 (2) and 1980 Porsche 911T, S, and SC - alas gone 1987 300SDL - Graf Spee; Euro-code headlamps; 16-inch 8-hole wheels - sold 1994 E420+(E500 suspension/E-code headlamps/PAD chip) sold 1968 250SE 4-speed (NICE car) - long gone 1962 220S 4-speed/column mount - long gone |
#2
|
||||
|
||||
I think the brakes from a second generation W126 are larger and will fit a W116. I'm not sure if the master cylinder and booster from a second generation W126 needs to be used in conjunction with the rotors and calipers.
Since you have 16" wheels, you won't have to worry about the rotors being too large to clear the stock 14" wheels.
__________________
Stop paying for animal enslavement, cruelty, and slaughter. Save your health and the planet. Go vegan! I did 18 years ago. https://challenge22.com/ DON'T MESS WITH MY MERCEDES! 1967 W110 Universal Wagon, Euro, Turbo Diesel, Tail Fins, 4 Speed Manual Column Shift, A/C 1980 W116 300SD Turbo Diesel, DB479 Walnut Brown, Sunroof, Highly Optioned, 350,000+ Miles |
#3
|
||||
|
||||
Thank you
That sounds like a good suggestion.
__________________
Charles Cleaver 1975 350SE + 1992 300CE-24 SportLine 5-speed + 2002 SLK320 6-speed + 1974 W114 280 1986 190E 2.3-16 (Decomm rear self-leveling suspension; Euro-code headlamps) sold 2004 Audi S4 6-spd - sold 1969 (2) and 1980 Porsche 911T, S, and SC - alas gone 1987 300SDL - Graf Spee; Euro-code headlamps; 16-inch 8-hole wheels - sold 1994 E420+(E500 suspension/E-code headlamps/PAD chip) sold 1968 250SE 4-speed (NICE car) - long gone 1962 220S 4-speed/column mount - long gone |
Bookmarks |
|
|