W115 brake and clutch hoses

[Lucas]

I'm diving in deep and replacing all my hoses/master/slave and rebuilding calipers.

First, for the hose that runs from reservoir to clutch master I found some auto tranny cooler line at the local auto spot, 8mm ID. Seems ok?

I'm ordering the rest and noticing differences in the rear brake lines. I believe for my ate calipers I need the rear line with two female ends. I need to go home and measure if it's 10.5" or 12".

The other has one female one male, sounds like it goes to a bendix caliper. I have hard lines going to my caliper and a small section of rubber where the control arm bolts to subframe.

Fronts seem all the same. Male female and 17.5".

And that clutch line between slave and master. I'm trying to see if someone carries everything to avoid multiple orders.

[Lucas]

When they "chassis number," is this the last 6 digits of my vin?

[Lucas]

Thanks to some PM's, the answer is yes.

[Lucas]

Update on the clutch line between slave and master. Everyone is back ordered. I found some on eBay, centric brand. $10. It actually was the one and fit.