Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Vintage Mercedes Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-08-2016, 02:27 PM
Bad Benzo's Avatar
Executive Spendthrift
 
Join Date: Feb 2016
Location: Rochester, NY
Posts: 23
W114/M110 Throttle Linkage Part ID

Last fall, I bought a 1976 W114 280 sedan off Craigslist for an insultingly cheap amount of money. It had an impressive stack of records and documentation, but it wouldn't start and the gas pedal would go right to the floor without engaging the throttle. I was able to figure out the starting problem (someone cut the condenser wire inside the distributor), but the pedal problem still exists.

I believe the problem lies with this part; please see the attached photos.

When I press the pedal down, this part will turn and get stuck, or pop off the linkage. The rubber is so aged that I cannot make out the numbers on it. I see 110, then what appears to be 1321, but my searches yield nothing. I tried looking for an exploded diagram, but didn't see anything with a similar part. Any ideas?


Thanks in advance.
Attached Thumbnails
W114/M110 Throttle Linkage Part ID-img_4262.jpg   W114/M110 Throttle Linkage Part ID-img_4263.jpg   W114/M110 Throttle Linkage Part ID-benzo-2898-copy.jpg  
Reply With Quote
  #2  
Old 02-08-2016, 05:09 PM
Registered User
 
Join Date: Feb 2011
Location: Modesto CA
Posts: 2,820
BB:

You have the orientation correct in the second pic; the forward steel plate was bonded to the rubber originally. For a temporary fix, rebond with super glue and 2-4 small sheet-metal screws. Someone here who still has EPC access may be able to come up with the part no.
Reply With Quote
  #3  
Old 02-09-2016, 08:09 AM
Registered User
 
Join Date: Aug 2006
Posts: 725
The condenser wire in the distributor was normally cut if the car still has the original transistorized ignition module hooked up. Sometimes if the module failed, it would be rewired to bypass it, in which case the condenser would be required.
Reply With Quote
  #4  
Old 02-09-2016, 08:49 AM
Registered User
 
Join Date: Aug 2006
Posts: 725
The part number for the linkage lever is A 110 070 13 21.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page