PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Vintage Mercedes Forum (http://www.peachparts.com/shopforum/vintage-mercedes-forum/)
-   -   79' 300D took 82' 240d autotrans need some advice tuning it (http://www.peachparts.com/shopforum/vintage-mercedes-forum/375724-79-300d-took-82-240d-autotrans-need-some-advice-tuning.html)

samboyellowsub 02-18-2016 11:48 AM

79' 300D took 82' 240d autotrans need some advice tuning it
 
My neighbor towed his 79' 300d several hundred miles without the drive shaft disconnected. told me he ruined it.

He bought my 82' auto trans that I had laying around for several years, it was mated to a fully dressed engine. much to my surprise, the transmission operated better than expected in his car but figuring out the shift points has been a challenge.

My transmission has a plug up near the bell housing part where his had something that went in there on passenger side. Really not sure from talking to him or his mechanic buddy what exactly it was. I am more familiar with the later year models than the first 123s and even less familiar with their transmissions.

First off, he is currently using his old mechanical overdrive controller (not sure if that is proper) instead of the vacuum operated one from mine. when he tried to use the vacuum one, he said it just immediately shifted all the way up (not sure if he said if it made it into OD).

With the mechanical switch, he has tuned it so it shifts fairly reasonably (but still a little high and of course not sensitive to throttle position) but won't reach overdrive.

I think the solution to take the entire vacuum and throttle actuated mechanism off my engine and mate it to his car? if so, the learning curve is currently so high on that I need some guidance.

Frank Reiner 02-18-2016 12:42 PM

Quote:

Originally Posted by samboyellowsub (Post 3572245)
My neighbor towed his 79' 300d several hundred miles without the drive shaft disconnected. told me he ruined it.

He bought my 82' auto trans that I had laying around for several years, it was mated to a fully dressed engine. much to my surprise, the transmission operated better than expected in his car but figuring out the shift points has been a challenge.

My transmission has a plug up near the bell housing part where his had something that went in there on passenger side. Really not sure from talking to him or his mechanic buddy what exactly it was. I am more familiar with the later year models than the first 123s and even less familiar with their transmissions.

First off, he is currently using his old mechanical overdrive controller (not sure if that is proper) instead of the vacuum operated one from mine. when he tried to use the vacuum one, he said it just immediately shifted all the way up (not sure if he said if it made it into OD).

With the mechanical switch, he has tuned it so it shifts fairly reasonably (but still a little high and of course not sensitive to throttle position) but won't reach overdrive.

I think the solution to take the entire vacuum and throttle actuated mechanism off my engine and mate it to his car? if so, the learning curve is currently so high on that I need some guidance.

1) None of the transmissions used in those years had overdrive (OD). They are four-speed trans which, in many models, start in 2nd.

2) To proceed, all of the number string on the right side pan rail of both of the transmissions will help a great deal.


All times are GMT -4. The time now is 07:13 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website