Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Vintage Mercedes Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-07-2017, 03:34 PM
Ten13
 
Join Date: Apr 2017
Location: Asheville, NC
Posts: 116
Part ID / Function

Hey again, Everyone...

I've got my valve cover off (1978 280ce) for a valve clearance check, and have discovered a cracked part, which appears to be some sort of crankcase ventilation / drainage / check-valve component. Can anyone help identify this, and offer advice on its function?

It's not even shown in my MBZ engine/chassis/unit catalog, so I'm at a loss.

Thanks in advance (again)..

-greg

Attached Thumbnails
Part ID / Function-img_0394-1-.jpg   Part ID / Function-img_0395-1-.jpg  
__________________
----------------------------------------------------------------------------
Filmmaker, Dad, Citizen of the World in Asheville, NC
=== current vintage stable ===
'73 VW Thing, '09 BMW 328i Convertible, '07 Honda Ridgeline, '94 Chevy Step Van
Reply With Quote
  #2  
Old 09-07-2017, 03:56 PM
Registered User
 
Join Date: Dec 2016
Posts: 119
Looks like a vacuum line. Under the intake manifold there are many, but it is almost impossible to tell what it should be connected to from the picture.

On my 280slc there is a vacuum line that goes from the throttle body (close-ish from where yours is) to the other side of the engine compartment, under the water reservoir.

Do you have the workshop manual for the engine?

EDIT: Forget that. You are referring to the black vertical tube? If so, that's the positive crank case ventilation system.

Last edited by rbtoj; 09-07-2017 at 05:30 PM.
Reply With Quote
  #3  
Old 09-07-2017, 06:42 PM
Registered User
 
Join Date: Jan 2006
Location: Tucson, AZ
Posts: 5,345
It's sort of a "blow by" tube which is connected to the EGR system. When the EGR is opened a sliding piston opens on the intake manifold and pulls any vapors into the intake to be burned.

PITA to replace. The "easiest" way is to pull the intake manifold. It makes a slobbering mess when it cracks all the way though.
__________________
“Whatever story you're telling, it will be more interesting if, at the end you add, "and then everything burst into flames.”
― Brian P. Cleary, You Oughta Know By Now
Reply With Quote
  #4  
Old 09-07-2017, 08:29 PM
Ten13
 
Join Date: Apr 2017
Location: Asheville, NC
Posts: 116
Quote:
Originally Posted by Mike D View Post
It's sort of a "blow by" tube which is connected to the EGR system. When the EGR is opened a sliding piston opens on the intake manifold and pulls any vapors into the intake to be burned.

PITA to replace. The "easiest" way is to pull the intake manifold. It makes a slobbering mess when it cracks all the way though.
Makes sense... Maybe I should hold off on re-activating my EGR system (air pump is seized and long-disconnected) until I address this issue, first. Need to get the car ready for it's San Francisco to Chicago & back trip starting on Sept 23rd! The gunk around it / below it seems like it's been there a long time, probably around when the previous owner disconnected the air pump.

Thank you!

-greg

__________________
----------------------------------------------------------------------------
Filmmaker, Dad, Citizen of the World in Asheville, NC
=== current vintage stable ===
'73 VW Thing, '09 BMW 328i Convertible, '07 Honda Ridgeline, '94 Chevy Step Van
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page