PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Vintage Mercedes Forum (http://www.peachparts.com/shopforum/vintage-mercedes-forum/)
-   -   mercedes m110 989 (http://www.peachparts.com/shopforum/vintage-mercedes-forum/394186-mercedes-m110-989-a.html)

mb aussie 07-13-2018 02:29 PM

mercedes m110 989
 
hi , I was wondering if someone had the torque settings for the crankshaft main bearing journals. Found some info though I am not convinced that 80 nm is the correct torque for the crank. any help would be appreciated. johnw

Mike D 07-13-2018 02:58 PM

Yup. My trusty, dusty Motor manual says 58 ft/lbs which equals 79 N.m. Add in a safety range error of 5% puts you right in the ball park.

mb aussie 07-13-2018 04:47 PM

Quote:

Originally Posted by Mike D (Post 3829417)
Yup. My trusty, dusty Motor manual says 58 ft/lbs which equals 79 N.m. Add in a safety range error of 5% puts you right in the ball park.

Thanks for the confirmation. It seemed rather low giving the size of the bolt,though they also appear to be stretch bolts as they do have a reduced area at the thread end.best to be sure, thanks again


All times are GMT -4. The time now is 11:15 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website