|
|
|
#1
|
|||
|
|||
76 280c intake manifold
does anyone have labor time to remove intake manifold. from a 110 921 engine . looks like manifold needs to be removed in order to get at bolt holding egr valve.
|
#2
|
|||
|
|||
Not sure about the specific labor time, but it should be possible to get to the intake bolts after removing the carburetor.
If I remember correctly there is no "rat's nest" of vacuum hoses under the intake of the carburated version, only the K-jetronic. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|