|
|
|
|
|
#1
06-16-2019, 06:06 PM
|
|||
|
|||
|
The best injector nozzles for a W115?
Are these Monark injectors the best available option available for my W115 240d equipped OM616 motor or does a better option exist?
__________________
Why I will never do business with "DieselKraut" again http://www.peachparts.com/shopforum/mercedes-benz-used-parts-sale-wanted/378935-why-i-will-never-do-business-dieselkraut-again.html 
|
|
#2
06-19-2019, 10:26 PM
|
||||
|
||||
|
I replaced mine with Monarks and achieved very good results. I have heard they are as good or better than OEM, but it's hard to say for sure. Make sure you have a pop test kit and extra shims to re-balance them, and also a fine piece of sandpaper to lap the adjacent sides. Recommend extra caution to prevent specks of grime or dirt from getting inside. Balancing them and doing the job right seems more important than Monark vs. OEM.
Henry
|
|
#3
06-20-2019, 02:59 AM
|
||||
|
||||
|
If you have worn nozzles then any thing new will be fine
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior  Don't leave that there - I'll take it to bits!
|
|
#4
06-20-2019, 07:13 AM
|
|||
|
|||
|
I'd have them tested and adjusted in needed by a diesel shop first.
|
 |
| Bookmarks |
|
|
Linear Mode
