|
|
|
#1
|
|||
|
|||
Tail Light Connector
Does anyone have the wire color/pin number layout for the right rear tail light assembly for a 1971 280se? My connector has come apart so not sure how it goes back together, need the complete car side connector with about 6" of cable. I placed a request for same in used parts.
Thanks Jerry
__________________
Jerry - If you don't learn something new every day, you aren't paying attention!! 1971 108 280SE 2.8 "Ronnie" 1985 300TDT (76,904 Original miles ) "Sadie" (Sold-went back to Arkansas) 1984 300DT "Green-go" (Sold) 1984 300DT "Silver Bullet" (Sold) 1956 220S Ponton 1985 300D (Sold) 1984 300D |
#2
|
||||
|
||||
from a 71 schematic and if you cant find part
this may help turn -black / green wire tail -green/red back up yellow/ grey stop black/red side marker - white/green ground - brown not sure from my schematic it that is left to right or right to left in plug pull the other side - should be the same ? Ill look in my stock , may have one
__________________
Ron 2015 Porsche Cayman - Elizabeth 2011 Porsche Cayman - Bond,James Bond Sadly MERCEDESLESS - ALways LOOKING ! 99 E320 THE Queen Mary - SOLD 62 220b - Dolly - Finally my Finny! Sadly SOLD 72 450SL, Pearl-SOLD 16 F350 6.7 Diesel -THOR 19 BMW X5 - Heaven on Wheels 14 38HP John Deere 3038E Tractor -Mean Green 84 300SD, Benjamin -SOLD 71 220 - W115-Libby ( my first love) -SOLD 73 280 - W114 "Organspende" Rest in Peace 81 380 SL - Rest in Peace |
#3
|
||||
|
||||
figure out which one is the ground and you should have rest oriented from that info. -CTH
|
#4
|
|||
|
|||
From the manual
|
#5
|
|||
|
|||
Thanks to all, that helps!
Jerry
__________________
Jerry - If you don't learn something new every day, you aren't paying attention!! 1971 108 280SE 2.8 "Ronnie" 1985 300TDT (76,904 Original miles ) "Sadie" (Sold-went back to Arkansas) 1984 300DT "Green-go" (Sold) 1984 300DT "Silver Bullet" (Sold) 1956 220S Ponton 1985 300D (Sold) 1984 300D |
#6
|
||||
|
||||
Wondering if you would have a similar schematic for the plug on the end of the cable bunch for the signal turn/high beam switch? This plugs under the dash, and I am struggling to work out which wire is for what. My workshop manual doesn't have a 54/2 section, unfortunately. I have a W110, but I think it will be the same.
|
Bookmarks |
|
|