|
|
|
#1
|
|||
|
|||
Has anyone done their own dash veneering?
I'm looking at trying my hand at this while it's too hot to be working in the hobby shop. If you've done it, what glue did you use?
Thanks
__________________
With best regards Al |
#2
|
|||
|
|||
I used 2 part epoxy, I think LePage sells them in 2 part tube. Worked great. Even clamping is key though.
|
#3
|
||||
|
||||
I considered it and may still consider it. It takes some investment in tools but probably worth it. Here is a site with some good info. I'm not fond of the over restored/plastic look that everyone drools over provided by the well known restorers. The wood did not look like that out of the factory.
https://www.joewoodworker.com/
__________________
Tony H W111 280SE 3.5 Coupe Manual transmission Past cars: Porsche 914 2.0 '64 Jaguar XKE Roadster '57 Oval Window VW '71 Toyota Hilux Pickup Truck-Dad bought new '73 Toyota Celica GT |
#4
|
|||
|
|||
Thank you!
__________________
With best regards Al |
Bookmarks |
|
|