Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Vintage Mercedes Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-28-2004, 09:48 AM
jlwggns
Guest
 
Posts: n/a
this make me sick!!

i haven't been looking around on E-bay much lately but this is what i came across friday.
i'm only 3 hrs from the car, or what's left now!
it still had two days left on the auction.

h**p://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2462924746

i sent the following e-mail

greetings, i have a 1976 300d just like this car. i hope you don't mind me asking several questions about the body on this car.

i like my 76 300d as the engine seems strong but i have several probles with it such as.

to much rust!! floorboards the rocker panels are real bad.
no carpeting.
all the seats are in BAD shape.
missing the underdash and side panels, one door panel is in bad shape.
transmission slips bad when shifting.
sunroof motor not opening the sun roof.
headliner falling in the rear.

so therefore i was wondering if you could just make a short reply to the following questions. the price so far is still great as the body looks good from the pics.
there will be a lot of good parts independent of some of the questions i have below.

btw i looked up a phone # for J Boman and got this #
316-***-****. if this is your number it would be as easy for me to call and ask about the condition.
if that would be ok just let me know how and when to call.

if you wouldn't mind perhaps i could drive up and look at this car Sat or Sun.

if you have a usb compatible camera a lot of the questions i have could be answered as easy with pic.


1: is there much rust behind the front tires

2: how are the floorboards on each side.
(mercededs are real bad on rusting out)

3: what shape are the floormats in (if any)

4 what condition are the seats.

5: are the windows elec or manual

6: will i need to pull the transmission and drive shaft
to tow this on a two wheel dolly
(towing from the front)
6a: do you think there would be many things that would
fall off (engine compartment)if towed from the rear

7: would the tires hold up to be towed on a two
wheel dolly

8: is there a sun roof

9: are the door panels and under dash covering intact

10: do you have a key for the doors

11: is the head liner intact

12: is there a radiator.

13: has the wiring been cut up in the engine compartment

14: do you actally have any idea as to the condition of
the transmission
15: are the knobs and switches in place
well i can't think of much else, as if this isn't enough, huh.

my idea would be to pull my engine and sit it in this body after i get a title and save my body for spare parts.

well thanks for any response you can send me.

jlwggns2000
--------------------


Question from: jlwggns2000
Title of item: 1975 MERCEDES 300D PARTS CAR
Seller: kmauk481
Starts: Feb-24-04 23:08:55 PST
Ends: Feb-29-04 23:08:55 PST
Price: Starts at $150.00
To view the item, go to: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2462924746

this was his reply:

Hi, Sorry but to late as a guy picked it up today and I cancelled the auction since there were no bids. He was going to haul it to the crusher...his name is Ben..his number is 316-***-**** . You might give him a call but it is probably already gone. Jerry

Reply With Quote
  #2  
Old 02-28-2004, 10:03 AM
jlwggns
Guest
 
Posts: n/a
well i did call the guy that picked up the car and as of 8 pm he hadn't crushed it yet.

he did cut the rear end out to put in his station wagon he said and torched the subframe to get to it easier so that takes care of swapping bodys.

now i'm wondering if i should try to go up and strip every piece that i can.
this guy wasn't sure of the condition as he wasn't really concerned about the body other than getting $90 a ton for it.

it's 2,800lb less the engine lets say $135 crushed.

heck just a few parts off it is worh that.

some of you give me a idea of what parts i shouldn't overlook if i go to strip it down.

i have a good idea of obvious parts but just some things that might cost a lot latter that i might not think of.


Last edited by jlwggns; 02-28-2004 at 10:10 AM.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page