|
|
|
#1
|
|||
|
|||
Solution? M110 Warm Start Problem
At a rare quiet moment, I was paging through my MB Service Manual for the M110 Engine. In the back, among many appendicies, is the "Annex" section. I was surprised to find a section within it titled, Hot Start Device. According to this, there is a hot-start solenoid, see below for the article.
Has anyone in this forum ever replaced this solenoid or know any more about it? I have checked countless threads on Warm/Hot Start Problems, but have never seen mention of this switch. Let me know what you think. If you request it, I will send you a printable version of the attachment below.
__________________
'78 W123 280E, 58,000 mi! '97 Mazda Miata '94 Isuzu Trooper, 4WD '03 MB C240 4-matic Wgn - Wife's From the Archives: '73 2002 '68 TR-250 '67 Austin Cooper "S" '59 Austin Seven (Mini) various p'up trucks Last edited by Apodman; 05-11-2004 at 11:54 AM. |
#2
|
||||
|
||||
That was a popular fix with the older straight sixes (M130 et al). I've never seen that solenoid on an M110 though.
__________________
Regards, Aaron |
Bookmarks |
|
|