|
|
|
#1
|
|||
|
|||
Door not opening...
My driver side rear passenger door does not open from the inside, only from the out. Any suggestions on what may be misaligned, broken? If so, would it be an easy repair? 72 280SEL 4.5
Thx all! |
#2
|
|||
|
|||
Had the same problem with my W108
The post (on the chassis) and the conical receiver (on the door) had gummed up. A dremel cleaned them to shiny condition.
The latch inside the car worked fine, but it took a strong shove to open the door from the inside. Also check alignment of these 2 parts, when closing the door
__________________
1970 280S M130 engine- good runner 1971 250 M130 engine- #2 rod bearing, gone 1971 280SE (blown engine,parts car) 1977 German 280S W116-only 33 years old |
#3
|
|||
|
|||
Thx, I'll check it out...
|
#4
|
||||
|
||||
Child Locks? Little lever on latch mechanism.
Not sure if you have 'em. Our 1969 Peugeot and my 1972 R12 wagon did as does LOML Stratus. Michael
__________________
Usta haves '69 250/8, '76 280C, 1971 250C 114.023, 1976 450SEL 116.033 Current have, 1983 300SD 126.120 |
#5
|
|||
|
|||
Ur absolutely right..it was the small button that controlled the child locks...thx all!
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|