|
|
|
#1
|
||||
|
||||
6.9 ride height
Anybody know the ride height spec for a 6.9? I measured from the ground to the fender lip thru the wheel centerline and have 27 inches on my front and 26.75 on the rear. My car looks really high with a big air gap above the tires in the wheel wells.
thanks Fred
__________________
MB-less |
#2
|
|||
|
|||
Fred;
from memory 14" from wheel center to fender lip ken s. |
#3
|
|||
|
|||
6.9 height
Does it has the height control? The 6.3, 600 and some 300 series has a little pull lever.
Or maybe your ride height sensor not being correct. The old cars has a little valve attach to the suspension thru a small linkage. Too low , they let more air in, and too high lets air out. And if u don't lock it when go hoist up, it will deflate once the wheel left hanging, when return to ground all your air will be discharged! Funny looks though, just like a kneeled Camel. |
#4
|
||||
|
||||
I'll stop by the garage where mine is being stored and give it a measure for reference tomorrow. I'll report back and see how it compares.
|
#5
|
||||
|
||||
I measured 12 5/8" from the center hub to the lip of the wheel arch. Is mine a tad low?
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rear suspension ride height | Brian Carlton | Diesel Discussion | 138 | 04-10-2013 03:02 AM |
W126 rear suspension ride height | Brian Carlton | Tech Help | 4 | 05-29-2005 09:26 PM |
SDL ride height | Brian Carlton | Diesel Discussion | 29 | 10-15-2004 11:01 PM |
400E Ride Height | timreid | Tech Help | 0 | 05-12-2003 02:42 PM |
Ride Height oddity | Nate Corey | Tech Help | 0 | 04-05-2001 07:56 PM |