|
|
|
#1
|
|||
|
|||
it's flooding
i have a 83 280S with the solex carby u all hate so much
problem is it flooding, the mixture screws are in full and it still runs any ideas as to what could be wrong ?? |
#2
|
|||
|
|||
A guess would be a stuck/worn down float valve.
Karsten |
#3
|
||||
|
||||
Card Float Needle And Seat
Friend,
To the best of my recollection, the carburetor float needle and seat assembly at the fuel inlet to the carb. will loosen from its mount in the carb. top. This causes fuel to flow into carb at an uncontrolled rate. The float needle may also simply be dirty or sticking. Best of luck. |
#4
|
||||
|
||||
also could be a fuel logged (waterlogged) float. that sinks instead of floating.
tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
Bookmarks |
|
|