|
|
|
#1
|
|||
|
|||
W108 Heater Box Parts Needed
OK, I finally took a look at the heater box in my 280SEL 4.5 which had been bypassed at some point in its history.
I discovered that the valves are seized (no surprise) and that a PO had disconnected both cables from the valves and also started to try and take apart one valve before giving up. I bought a spare heater core which have the valve parts that are missing but I am in need of one of the clips that holds the control cable's jacket to its post...does anyone have a spare one of these clips??? Thanks in advance.
__________________
Marty D. 2013 C300 4Matic 1984 BMW 733i 2013 Lincoln MKz |
#2
|
||||
|
||||
I lost one of these behind my dash somewhere - I used a short length of that spooled wire to hold it on there. it's worked for about 3 years now - it isn't pretty but nobody sees it anyway!
__________________
Current: 2021 Charger Scat Pack Widebody "Sinabee" 2018 Durango R/T Previous: 1972 280SE 4.5 2014 Jeep Grand Cherokee Limited "Hefe", 1992 Jeep Cherokee Laredo "Jeepy", 2006 Charger R/T "Hemi" 1999 Chrysler 300M - RIP @ 221k |
#3
|
|||
|
|||
I could probably hold it using zip-ties but wanted something original if anyone had a parts box lying around...if nobody has the parts I'll make due.
-MD
__________________
Marty D. 2013 C300 4Matic 1984 BMW 733i 2013 Lincoln MKz |
#4
|
|||
|
|||
I was able to get my core's valves out (well one anyway) and it is different than the core I had here on my bench! Apparently they made at least 2 different styles...does anyone have any spare heater core valves? One of mine was broken off (the square part there the cable lever connects to the valve was broken by a prior mechanic)...if anyone has one of these I'd like to buy it.
__________________
Marty D. 2013 C300 4Matic 1984 BMW 733i 2013 Lincoln MKz |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|