|
|
|
#1
|
|||
|
|||
450sel 6.9 electric window wiring
Does anyone know how the front right electric windows are wired? When replacing the switch I accidentally pulled the wires out of the housing that plugs into the electric window switch (not my fault the covers were missing).
Many thanks.
__________________
With best regards Al |
#2
|
||||
|
||||
Sitting in car facing forward;
Black Green Red |
#3
|
|||
|
|||
Thanks
Thanks David, is that in a row?
__________________
With best regards Al |
#4
|
|||
|
|||
Thanks
Switch replaced and works great. Thanks again
__________________
With best regards Al |
#5
|
||||
|
||||
Al, why did you replace the switch? Was it not working, or was the window slow?
__________________
MB-less |
#6
|
|||
|
|||
Switch failed
Fred
The switch failed on my 6.9 when winding the window down on a very rainy day. I replace it with a used one that I pulled from the junk yard. If you have slow windows, it's probably the regulator that's bent. A replacement is around $100 new. I have already bought one for my 6.9 drivers window but have yet to replace it. I replaced the regulator on my w108 last year and the window now quickly moves up and down.
__________________
With best regards Al |
#7
|
||||
|
||||
Quote:
__________________
MB-less |
#8
|
|||
|
|||
allignment
Fred , there is a known alignment problem with W116 regulators that could also cause the regulators to move slowly.
If it's switches, try switching them out with the 6.3, if it's a post 71, then they should be the same. All the best
__________________
With best regards Al |
Bookmarks |
|
|