|
|
|
#1
|
|||
|
|||
Replacing front seal - Any tips/tricks?
There is a long and detailed write-up on the Diesel page about replacing the front seal using a small plastic cup so as to not disturb the outside rim, etc. to keep it from leaking.
Anyway, any tips or tricks doing this on my '72 250 - M130 engine? How do I go about prying the seal out and what do I need to be careful about? Do I need to replace the spacer? Thanks, ryan
__________________
RG Newell 1984 300D 1972 250 1986 560SL 1991 300CE |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|