|
|
|
#1
|
||||
|
||||
How hard is a differential swap?
Hey, all:
jim16671836 has come to my rescue with a used diff from his parted-out '71 220D. But I'm curious as to just how difficult a job it is to do the replacement. Has anybody done this? Are there any special tricks, dangers, etc.? I'd just like to have an idea what I'm getting myself into before I start. I look forward to your response! Thanks!
__________________
Carmody Wichita, Kansas USA Air Capital of the World 1968 220 (my first MB!) |
#2
|
|||
|
|||
Did you try a search?
__________________
Chuck Taylor Falls Church VA '66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe |
#3
|
||||
|
||||
Hey, Chuck:
Yeah, I did search a couple different ways, but somehow I missed the link you posted. Thanks a lot!
__________________
Carmody Wichita, Kansas USA Air Capital of the World 1968 220 (my first MB!) |
#4
|
||||
|
||||
Quote:
And the usual things one runs into are replacing the rear flex disc, watch out for cracks in the boots on the half shafts might be a good time to replace them (the shafts usually, not the boots) if necessary as most of the work is done getting them out of the differential And replace fluid with a good brand synthetic 75/90W lube to keep it happy a long time!
__________________
'95 E320 Wagon my favorite road car. '99 E300D wolf in sheeps body, '87 300D Sportline suspension, '79 300TD w/ 617.952 engine at 367,750 and counting! |
#5
|
||||
|
||||
Diehard: Yes, mine has the four-speed floor shifter. I will make a note to check for the gear ratio specs...you say it's stamped right onto the unit, no?
I'm almost certain to find some more worn-out bits while I'm up underneath there, most likely included exactly the stuff you mentioned...you're right about it being a good time to swap that stuff, so as not to have to rip everything apart twice. When changing the fluid in a diff, is there some sort of cleaner (like "motor flush") I can run through it before refilling with a quality lube? Just to make sure any sludge is washed away? Just curious. Thanks for your input on this...it's most appreciated!
__________________
Carmody Wichita, Kansas USA Air Capital of the World 1968 220 (my first MB!) |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|