|
|
|
#1
|
||||
|
||||
Cruise Control : W116 : Not working
My cruise control doesn't work. does nothing at all.
here's the condition of things. Tach doesn't work, might be sensor or amp. cruise control stalk switch is pretty loose. Where do I start?
__________________
RIP: 80 300SD RIP: 79 450SEL 2002 E430 4matic (212,000km) 2002 ML500 'sport' ____________________________ FACEBOOK: PANZER450 |
#2
|
||||
|
||||
The tach is probably an amp issue. Try pulling the module and jamming some paper or foil or foam at the top and press it down putting pressure on the contacts.
As for the CC amp, those things burn out all the time, you can try to remove the case and resolder the connections. |
#3
|
||||
|
||||
cdplayer
Quote:
Your brake light bulbs must be Oshram or Bosch only. The cruise picks up a critical ground signal from these designs. Without the signal, the cruise will not work. I found I had replaced one of the bulbs several months ago with the usual 1157 you can get at any parts house. Bad choice. Make sure all of your brake light bulbs are only Oshram or Bosch. |
#4
|
||||
|
||||
Panzer - Did you ever figure this out? I got the same problem!
Bert - NH
__________________
1979 300SD 83k miles Astro Silver Metallic/Black leather #3447 1990 350SDL 202k miles (3L engine from an 87 300D)Black/Grey leather 2006 Pleasure-Way Class B MoHo (Sprinter chassis) 134k miles 2005 E320CDI 270k (car is sooo fast - I can't believe it's a diesel!!!) |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|