|
|
|
#1
|
|||
|
|||
Need help!
Could somebody take a picture of the front engine shock from a fintail? I found that mine was un-attached in a bag. One of the washer is badly damaged and I think that's why somebody had remove it. I have found a replacement washer (I think) but in trying to re-attach it, the number of washers and rubber bushings don't make sense. I went to the EPC online and it only shows one bushing, a washer and a nut for the top attachment point but nothing for the bottom. I thought if some one could take a picture of theirs in place that would be my answer or if somebody has a picture diagram.
Thank you Bla8310 Chicagoland 67 230 w110 |
#2
|
|||
|
|||
I have a 1962 220Sb Fintail. I don't recall seeing a "shock". Do you have a picture or diagram that shows where it is supposed to be?
__________________
1962 220Sb ~ The Emerald Bullet http://www.youtube.com/watch?v=hx6tN1W48_o 1957 Ponton 220S 2001 S600 Daily Driver The Universe is Abundant ~ Life is GOOD!http://www.classiccarclock.com |
#3
|
|||
|
|||
That 230 may start to have an engine shock, 250/280 do.
Just always contain the rubber with washers to hold rubber in place, I think that there is a parts kit to refresh the mounts when you replace the shock available separately. Washers, rubber, lock nut. |
Bookmarks |
|
|