Hello All, I have been searched for months now. Other then Dealer where Can I buy a set of standard connecting ROD BEARING for my M130??
any link or place? Very appreciate for yours help and feedback in advance.thanks

They can be obtained for ~$135 for the set at super-deal pricing.

P/N: 114 030 0460; Ø48.00mm; common to all M130's I think.

Have you mic'd the crank for size & ovality to confirm sizing? That'll be critical for proper sizing.

Are you doing a ring job rebuild?

Hi daidnik, sorry to reply late.
where can you find $135 for the set? can you give me the link? is it a set of bearing for 6 connecting rods or a set per rod?
I spoke to the Dealer they told me around $132 for a set per rod, I need 6 set so the total will be $792, special order from Germany. this is crazy......

And yes I did mic'd the crank Ø48.00mm standard size rod bearing that I'll need.
I had everything for the rebuilt but not the Rod Bearing. if you or anyone know of the place please let me know thanks you so much in advance...cheer

The price is for the set for all 6 rods.

Send me a private email and I will send you the dealer info where I found the price.

I believe the ovality spec is probably 0.01mm which equates to 0.0004 inch. You should convince yourself that it satisfies this also.

Have you checked tfor these in the Fastlane? You would have to request a quote and give them the P/N, but Phil will get you the quote. I would think he could be close or maybe even cheaper. These parts for the 6-cyl motors are generally fairly easy to get.


David

Hi David,
I just send you my private email. please read and thanks for your help...
best regard.
Loy

You are very close to Metric Motors, a great source for this stuff.

www.mercedesengines.net

__________________
Chuck Taylor
Falls Church VA
'66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe

Check out CLEVITE for bearings. Does the engine have a knock? Low oil pressure all the time?

__________________
Regards

Warren

Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor

Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL

ENTER > = (HP RPN)

Not part of the in-crowd since 1952.

I know, He had only a few set but he won't sell me one. no matter how I offer him. any one know please share......thanks

Wbain, I'll try and do you know CLEVITE part number? and which site?

Bump! any one??????

Thanks you for your helping DAIDNIK. I just read your mail....cheer