|
|
|
|
|
#1
02-23-2011, 02:33 PM
|
|||
|
|||
|
Flywheel Locking Tool-m180
Anyone know the appropriate flywheel locking tool for an m180? There
are a bunch of tools listed on ebay, but none of them specify the m180.
__________________
1981 300TD 310k miles 1970 280sel 172k miles 1966 230 Fintail 162k miles "Where are we going? And why am I in this hand basket?" 
|
|
#2
02-23-2011, 07:07 PM
|
|||
|
|||
|
What are you attempting to do? Sometimes I jam a bar behind the front ballancer if I'm removing the crank screw or something like that. If you are trying to work on the flywheel end you can sometimes stick a big screw driver in between the teeth on the ring gear.
Give me an idea of what you want to do and that will give me an idea which way to send you.
|
|
#3
02-23-2011, 07:11 PM
|
|||
|
|||
|
I want to change the front crank seal. I understand you can loosen the bolt by levering against the ground and using the starter. My biggest concern is tightening the bolt. Wouldn't jamming the balancer tend to distort it while seating on the crank?
__________________
1981 300TD 310k miles 1970 280sel 172k miles 1966 230 Fintail 162k miles "Where are we going? And why am I in this hand basket?"
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
