|
|
|
#1
|
||||
|
||||
Hairball's New Fan Shroud
I needed a fan shroud (Texas heat) but unable to locate one. I found a DIY for one made out of fiberglass. I have never worked with fiberglass so it took me three attempts to get it right. Not very easy but now Hairball has a fan shroud. The first one was terrible at best. The second one was was too thin and a little off. I am wondering if the fan depth clearance is correct. Also should I install some kind of rubber seal between the shroud and radiator?
While the radiator was out I stripped it and repainted it. I may take it out later this summer and work on the finish but there is a long list of repairs I need to address first.
__________________
Britton McIntyre 68 280 SE coupe 'Hairball' 70 280 SL 71 280 SEL - RIP May 2010 |
#2
|
||||
|
||||
Nice work! My 108's cracked before I ever was driving it, and was held with aluminum tape for years. I got lucky and found an unbroken one in awesome shape in the yard and grabbed it... about 8 years ago. I never put it in, for fear of breaking such a hard-to-find part! It'll go with my 108 when I sell it.
__________________
Current: 2021 Charger Scat Pack Widebody "Sinabee" 2018 Durango R/T Previous: 1972 280SE 4.5 2014 Jeep Grand Cherokee Limited "Hefe", 1992 Jeep Cherokee Laredo "Jeepy", 2006 Charger R/T "Hemi" 1999 Chrysler 300M - RIP @ 221k |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|