Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Vintage Mercedes

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-11-2002, 06:08 PM
Registered User
 
Join Date: May 2001
Location: Kitchener, Ontario
Posts: 221
problem with speedo when cold

The cars speedo that is.
Speedometer made some horrible noises this morning. It was the first -15 degree Celcius overnight where I drove it in the morning. at about 15 mph it started to make a horrible whineing that got worse to 40 mph where the pitch of the sound stopped changing. Is this something I can correct by shooting some penetrating white grease down the cable tube?

Below -5 celcius it also starts VERY hard ideas?

Mark
Reply With Quote
  #2  
Old 02-11-2002, 07:29 PM
Aaron's Avatar
Moderator
 
Join Date: Aug 1999
Location: Cincinnati, Ohio
Posts: 1,935
Unfortunately, this probem is usually the speedo head. Cable problems are usually limited to fluctuating needles and/or no speed indication. I would recommend having the speedo rebuilt by a reputable VDO authorized shop, such as Steve Brotherton's Continental Imports or you can send the unit directly to VDO of N. America.
__________________
Regards,
Aaron
Reply With Quote
  #3  
Old 02-11-2002, 10:35 PM
Registered User
 
Join Date: May 2001
Location: Kitchener, Ontario
Posts: 221
I took it out and as always you nailed it Aaron.
But, stubborn as I am I took the head unit apart and juiced it up a bit and its quiet for now.

Shipping would kill me even before repair charges so I think I'll have to search for a speedo from the Euro used parts weasels up here. Sadly, they seem to think its OK to charge 230SL prices for a 230.

Well, lets see how long it lasts.
Reply With Quote
  #4  
Old 02-12-2002, 12:52 AM
Registered User
 
Join Date: Oct 2001
Location: Richmond, KS
Posts: 197
Howling Speedometer

When I first bought my 72 280SE 4.5 the radiator blew two miles down the road. So I parked it overnight and the next morning at 5:30 I drove the half mile to the radiator repair shop in the freezing cold. Half way there the speedometer started up with this horrendous howl like it was coming out of the dash, scaring the hell out of me and making me wonder if buying this thing had been such a good idea. It quit being so loud with more frequent driving but lubing it probably wouldn't hurt.
Reply With Quote
  #5  
Old 02-12-2002, 09:13 AM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
The noise comes from a vibration in the rotating magnet. It is caused by dry lubrication and too much free play. Technically the repair is a mount with bushing (they are probably relatively cheap), lube and adjustment.

I fixed these for years before we actually got technical and started real speedo repairs. The lube and adjustment will be satisfactory in all but a few with really worn bushings.

Remove the speedo head, remove the chromed back plate and there are two screws that hold the magnet housing/magnet assy to the back. Remove it and you will see an adjustable tentioning block against the forward center of the rotating magnet. The head of the magnet dancing is what causes the noise. One should remove the magnet from the housing, clean and lube. On reassembly adjust the endplay with the thrust tentioner above. Unless you have a 110 body with the revolving speedo, this is all pretty easy once the cluster is out.
__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
  #6  
Old 02-12-2002, 09:40 AM
Mark V.II
Guest
 
Posts: n/a
Hey, thats exactly what I did...except for the clean and adjust part! I guess I'll have to go back in there and do the job right. Besides after I cleaned the speedo glass, the other side looks horrible by comparison. While I'm in there has any one cleaned the dash light rheostat before? I thought I might take that off and fire some contact cleaner at it and see if it works a bit better.

Mark
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cold start problem Rocky Tech Help 6 05-07-2004 02:53 PM
Cold Start Problem on a VW 1.8 Turbo -- Helping a Friend tvpierce Tech Help 3 03-17-2004 01:24 PM
Cold Start Problem Tigger55b Tech Help 1 01-29-2004 11:22 AM
Need help with cold starting problem Mike Costantini Tech Help 7 11-19-2003 12:44 PM
Cold Running Engine Problem hippie_elmo Vintage Mercedes 1 01-25-2002 10:31 AM



All times are GMT -4. The time now is 10:09 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page